ClickCease
BOOK ONLINE HERE & SAVE 10%
Asko Dishwasher Error Code F7

Asko Dishwasher Error Code F7

If you’ve encountered Asko Dishwasher Error Code F7, your dishwasher is signaling a pumping out fault. This error occurs when the water is not successfully evacuated within 120 seconds during the pumping-out phase, resulting in a program interruption. But fear not – we’re here to guide you through the diagnosis and resolution of this issue.

To effectively address Error Code F7, it’s essential to examine the following components:

  1. Drain Pump: Begin by inspecting the drain pump for any blockages or malfunctions. A faulty pump can impede the proper drainage of water.
  2. Hoses: Check the dishwasher hoses for kinks, clogs, or any signs of damage. A blocked or restricted hose can hinder the water evacuation process.
  3. Installation of Drain Hose: Ensure that the drain hose is correctly installed. Improper installation may lead to drainage issues and trigger Error Code F7.
  4. Control Unit and Wiring: Examine the control unit and wiring for any visible damage. A malfunction in these components can disrupt the communication necessary for proper drainage.

Steps to Resolve Error Code F7:

  1. Inspect and Clean the Drain Pump: Remove any debris or foreign objects that may be obstructing the drain pump. Ensure it moves freely.
  2. Check Hoses Thoroughly: Examine both the inlet and outlet hoses for any blockages. If needed, clean or replace the hoses to facilitate proper water flow.
  3. Verify Drain Hose Installation: Confirm that the drain hose is securely installed according to the manufacturer’s guidelines. Make any necessary adjustments.
  4. Examine Control Unit and Wiring: Carefully inspect the control unit and wiring for any visible damage. If identified, repair or replace the affected components.
  5. Restart the Dishwasher: Once you’ve addressed the potential issues, restart the dishwasher and observe its performance. If the problem persists, professional assistance may be required.