Asko Washer Error Code E11

One of the common challenges Asko washer users may encounter is Error Code E11, indicating an overflow issue. This occurs when the water level in the machine exceeds the normal limits. While it may be a cause for concern, addressing Error Code E11 is often manageable with a few DIY steps.

1. Faulty Water Inlet Valve: A malfunctioning water inlet valve may lead to an uncontrolled influx of water.
2. Pressure Switch Problems: Issues with the pressure switch, which regulates water levels, can trigger an overflow.
3. Clogged Drain System: A blocked drain pump or drainage system may hinder water expulsion, resulting in an overflow.

DIY Solutions for Error Code E11: Overflow

1. Pause and Reset:
   • Stop the washer immediately to prevent further overflow.
   • Turn off the power and unplug the machine.
   • Wait for a few minutes, allowing the appliance to reset.
2. Inspect Water Inlet Valve:
   • Check for any visible signs of damage or blockage in the water inlet valve.
   • Clean or replace the valve if necessary.
3. Examine Pressure Switch:
   • Inspect the pressure switch for any loose or damaged connections.
   • Ensure the pressure switch hose is not clogged.
   • Replace the pressure switch if needed.
4. Clear Drainage System:
   • Examine the drain pump, hoses, and filters for debris or blockages.
   • Clean or unclog any obstructions in the drainage system.
5. Check for Leaks:
   • Inspect the washer’s exterior and connections for leaks.
   • Tighten any loose connections and address any visible leaks promptly.
6. Restart the Washer:
   • Plug in the washer and turn it on.
   • Start a short cycle to verify if the overflow issue persists.

If DIY efforts do not resolve the Error Code E11 or if you are uncomfortable performing these tasks, it’s advisable to seek professional help. Asko Appliance Support specializes in addressing Asko Washer Error Codes, providing efficient and reliable solutions to get your appliance back to optimal performance.